Pravah Electricals & Electronics LLP

The AJ65SBTB2N-16R is a remote PLC output module from Mitsubishi Electric used in industrial automation systems. It’s part of Mitsubishi’s CC-Link I/O series and is designed to interface with programmable logic controllers (PLCs) to control external devicesKey Features

• Output Type: Relay (mechanical contacts) — ideal for switching AC or DC loads.

• Number of Outputs: 16 separate relay output channels.

• Rated Load:
  • 2 A per point at DC 24 V or AC 240 V (resistive load).

• Communication: Integrates into a CC-Link network for distributed I/O control.

• Wiring: Terminal block with screw connections for easy installation.

• Dimensions: Approx. 179 mm (W) × 50 mm (H) × 40 mm (D).

• Power: Typically powered from the PLC’s 24 V DC supply.

🛠 Typical Uses

This module is commonly used for:

• Switching industrial loads like motors, solenoids, lights, and actuators.

• Acting as a distributed output station on a CC-Link network.

• Replacing or upgrading legacy Mitsubishi PLC systems with remote relay outputs

"Pravah Electrical And Electronics LLP " Is A Well Known Wholesaler Of PCB Module , And Electric Modules etc

The Allen-Bradley 1794-OB32P is a 32-point digital DC output module designed for use with the Flex I/O system. Manufactured by Rockwell Automation, this module is ideal for controlling devices such as pilot lamps, buzzers, horns, relay coils, and solenoidsey Specifications

• Output Type: Sourcing (provides current to the load)

• Nominal Output Voltage: 24 VDC

• Output Current per Channel: Maximum 500 mA

• Total Output Current per Module: 14 A (6 A for channels 0–15; 8 A for channels 16–31)

• On-State Voltage Range: 10–31.2 VDC

• On-State Voltage Drop: ≤ 0.5 V

• Off-State Leakage Current: ≤ 0.5 mA

• Isolation Voltage: 50 V continuous

• Operating Temperature: 0 to 55°C (32 to 131°F)

• Storage Temperature: -40 to 85°C (-40 to 185°F)

• Mounting: DIN rail

• Enclosure Type: Open-type

• Compatible Terminal Bases: 1794-TB32, 1794-TB32S

• Power Dissipation: 5.3 W at 31.2 VDC

• Thermal Dissipation: 18.1 BTU/hr at 31.2 VDC​

  Protection Features

  Each output channel is electronically protected against short circuits, overloads, and over-temperature conditions. In the event of a fault, the module automatically shuts down the affected output and recovers once the fault is cleared. Note that the module does not send a fault message to the processor upon such events.

   Dimensions & Weight

  • Dimensions (H x W x D): 45.7 x 93.9 x 53.3 mm

  • Weight: Approximately 0.3 kg